Just installed a 600 unit. We had to turn blower on because furnace time alone was not increaing the RH enough. Will the blower shut off once the desired RH is reached or do I need to flip the switch? My concern is that without the blower the desired RH might not be attained.
Thank you for contacting us regarding your model 600 humidifier. If the control with your model 600 is the model 60 automatic digital humidistat control (ADHC), you have an optional blower activation built into the control. When wired properly, the model 60 can extend the blower run time to allow your humidifier to continue to run after a heat call has been satisfied. Once the humidity set point has been satisfied, the blower activation will turn off automatically.
If your control does not offer the blower activation or you are not using the available blower activation, the control does not have the capability to turn off the blower when the humidity set point has been reached. In this case the blower would need to be turned off manually.
Additionally you have the option to call our technical support department at 1-800-334-6011 to discuss this with one of our technicians over the phone. Our tech support department is available Monday through Friday, 7 am to 5 pm CST.
If you have any further questions regarding this or any of our products, please feel free to contact our customer service department at your earliest convenience. 1-800-334-6011.